Silex technology SDZ-330 instruction manual White Balance Control

Operating Your Camera

5. Select on screen position of the CAM TITLE.

Move the cursor to 'POS' and press SET button.

The CAM TITLE is displayed on the top-left of the monitor screen. (Default position)

FRONT DOOR

to Locate, then SET

Select the position by using the 4-directional buttons, then press the SET button to confirm the position.

FRONT DOOR

6. When completed, move the cursor to 'END' and press SET button.

COLOR CCD CAMERA 22 User’s Manual

White Balance Control

Your camera provides three 'WHITE BAL' control modes for your choosing in adjusting the white balance.

1.Press the SET button to access the main setup menu and move the indicator to 'WHITE BAL' using the UP or DOWN button.

2.Set 'WHITE BAL' using the LEFT or RIGHT button.

The three white balance control modes are as follows :

ATW(Auto Tracking White Balance): When color temperature is 1800 ~ 10500˚K, select this mode.

AWC (Auto White balance Control): The white balance is automatically adjusted in a specific environment. In order to obtain the best result, press the SET button while the camera focuses on white paper. If the environment including the light source is changed, you have to adjust the white balance again.

Manual: To fine adjust, select the Manual mode. You can increase or decrease the red or blue factor while monitoring the difference on the screen. Set to 'MANUAL' mode and press the SET button. Increase or decrease the value for red(R-Gain) and blue(B-Gain), watching the color of the picture, and press the SET button when you obtain the best color.

COLOR CCD CAMERA 23 User’s Manual