Silicon Image SSD-C08G(I)-3150 manual IOIS16, Absolute Maximum Ratings

ELECTRICAL SPECIFICATION			SSD-CXXX(I)-3150 DATA SHEET
		Table 8: Signal Descriptions (Continued)
	Signal Name	Pin	Type Description
	-WE		In true IDE mode, this input signal is
	(True IDE mode)		not used and should be connected to
			VCC by the host.

WP24

(PC Card memory mode)

OWrite Protect Memory Mode. The SiliconDrive CF does not have a write protect switch. This signal is held low after the completion of the reset initialization sequence.

-IOIS16

(PC Card I/O mode)

I/O Operation. When the SiliconDrive CF is configured for I/O operation, pin 24 is used for the -I/O Selected, which is a 16-bit port (-IOIS16) function. A low signal indicates that a 16-bit or odd byte only operation can be performed at the addressed port.

-IOIS16	In true IDE mode, this output signal is
(True IDE mode)	asserted low when this device is
	expecting a word data transfer cycle.

ABSOLUTE MAXIMUM RATINGS

Table 9: Absolute Maximum Ratings

Symbol	Parameter	Minimum	Maximum	Units
Ts	Storage Temperature	-55	125	°C
TA	Operating Temperature	-40	85	°C
VCC	VCC with Respect to GND	-0.3	6.7	V
Vin	Input Voltage	-0.5	3.8	V
Vout	Output Voltage	-0.3	3.6	V

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

3150C-10DSR PAGE 14 FEBRUARY 2, 2009