ToolStick-F321DC
2. Contents
The
ToolStick C8051F321 Daughter Card
A ToolStick daughter card requires a ToolStick Base Adapter to communicate with the PC. ToolStick Base Adapters can be purchased at www.silabs.com/toolstick.
3. ToolStick Overview
The purpose of the ToolStick is to provide a development and demonstration platform for Silicon Laboratories microcontrollers and to demonstrate the Silicon Laboratories software tools, including the Integrated Development Environment (IDE).
The ToolStick development platform consists of two components: the ToolStick Base Adapter and a daughter card. The ToolStick Base Adapter provides a USB debug interface and data communications path between a Windows PC and a target microcontroller.
The C8051F321 Daughter Card includes a pair of LEDs, a potentiometer, a micro USB connector, a switch connected to a GPIO, and a small prototyping area which provides access to all of the pins of the device. This prototyping area can be used to connect additional hardware to the microcontroller and use the daughter card as a development platform.
Figure 3 shows the ToolStick C8051F321 Daughter Card and identifies the various components.
Power LED
VDD
GND | GND |
PWR
D1
P3 | TOOLSTICK F321 DC |
| |
P2 |
|
P1 |
|
P0 |
|
Px.0 | Px.1 Px.2 Px.3 Px.4 Px.5 Px.6 Px.7 |
VBUS_BA
Full Pin access
P2.2 LED
R4
P1.7
D2
P2.2
VBUS_COMM
VBUS
F321 U2
J2
P2.0
S1
USB
Connector
C8051F321
P1.7 Potentiometer | P2.0 Switch |
Figure 3. ToolStick C8051F321 Daughter Card
2 | Rev. 0.1 |
