Silicon Optix CM-525P manual Setting UP the Unit for Termination, Off

2.INSTALLATION / CONFIGURATION

The Pro-Pack dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical and building codes. The system should be installed according to Figures 3 through 9.

Figure 5 - Layout of Switches

D. SETTING UP THE UNIT FOR TERMINATION

The device which is connected at end of line, whether it be a dome camera or keyboard controller, must have the cable for communication terminated by setting the appropriate DIP switch. Without proper termination, there is potentiaI for control signal errors. Total length of the cable for communication should not exceed 3,000 feet.

on

9 10

9	10	Function
ON	ON	Termination
OFF	OFF	NOT Terminated

Termination

Figure 6 - Termination of Dome Camera Data Line

27104AF 15