Silicon Optix CM-525P manual Important Safeguards

Models: CM-525P

1 56
Download 56 pages 6.31 Kb
Page 6
Image 6

IMPORTANT SAFEGUARDS

1.Do not expose the camera to rain or moisture - The OPTIX camera itself is designed for enclosed use or for use in a location where it is protected from rain and moisture. When exposed to moisture, turn the power off immediately and ask a qualified service personnel for servicing. Moisture can damage the camera and also create the danger of electric shock.

2.Do not install this camera upside down -

This camera is designed for mounting on the ceiling or wall.

If you install this camera upside down, for example, mounted on the floor, it may cause malfunction.

3.Do not attempt to disassemble the camera - To prevent electric shock, do not remove screws or covers.

There are no user serviceable parts inside. Ask a qualified service personnel for servicing.

4.Avoid placing the camera in direct sunlight -

7.Before operating, please check proper temperature, humidity and power source ratings - -Use the camera under conditions where temperature is between 0C - 45C and humidity is below 60%. The input power source is 24VAC 850mA.

8.Do not use the camera in such places as shown below. The lens may become cloudy due to condensation if the camera is used under the following conditions -

-Rapid temperature fluctuation by switching an air conditioner on and off.

-Rapid temperature fluctuation due to frequent door opening and closing.

-Used in an environment where eyeglasses become foggy.

-Used in a room filled with cigarette smoke or dust.

If the lens becomes cloudy due to condensation, remove the dome cover and wipe all moist surfaces with a soft cloth.

Do not aim the camera at bright objects. Whether the camera is in use or not, never face the unit towards direct sunlight or other extremely bright objects. Otherwise blooming or smearing may be caused.

5. Do not use strong solvents or detergents -

Use a dry cloth to clean the camera when it is dirty. If it is hard to remove the dirt on the camera, use a mild detergent and wipe it gently.

9.Consumables -

Parts having contacts such as the lens-drive motors, cooling fan motor and slip-rings built inside the camera are subject to wear with time.

For information on the replacement and maintenance of such parts, please ask the nearest service center.

6.Handle the camera with care -

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage.

6

27104AF

Page 6
Image 6
Silicon Optix CM-525P manual Important Safeguards