ATA COMMANDS |
| ||||
|
| Table 10: IDENTIFY DEVICE Information (Continued) |
| ||
|
|
|
| ||
| Word | Value | Description | ||
|
|
|
| ||
| 84 | 4000h | Command set/feature supported extension: | ||
|
| 15 | Shall be cleared to 0 | ||
|
| 14 | Shall be set to 1 | ||
|
| 5 | 0 | = General Purpose Logging feature set is | |
|
|
| not supported | ||
|
| 3 | 0 | = Media Card Pass Through Command | |
|
|
| feature set is not supported | ||
|
| 2 | 0 | = Media serial number is not supported | |
|
| 1 | 0 | = SMART | |
|
| 0 | 0 | = SMART error logging is not supported | |
|
|
|
| ||
85 | 7000h | Command set/feature enabled: | |||
|
| 14 | 1 | = NOP command is enabled | |
|
| 13 | 1 | = READ BUFFER command is enabled | |
|
| 12 | 1 | = WRITE BUFFER command is enabled | |
|
| 10 | 0 = Host Protected Area feature set is disabled | ||
|
| 9 | 0 | = DEVICE RESET command is disabled | |
|
| 8 | 0 | = SERVICE interrupt is disabled | |
|
| 7 | 0 | = Release interrupt is disabled | |
|
| 6 | 0 | = | |
|
| 5 | 0 | = Write cache is disabled | |
|
| 4 | Shall be cleared to 0 to indicate that the | ||
|
|
| PACKET Command feature set is not | ||
|
|
| supported | ||
|
| 3 | 0 = Power Management feature set is disabled | ||
|
| 2 | 0 | = Removable Media feature set is disabled | |
|
| 1 | 0 | = Security Mode feature set is disabled | |
|
| 0 | 0 | = SMART feature set is disabled | |
SILICONSYSTEMS PROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
PAGE 14 | MARCH 16, 2009 |
