- 5-
4. Mark the four points for the drillholes with
a pencil.
5. Mark the drillhole with a mandril.
6. Firmly secure the mounting plate qwith the
supplied screws.
7. Hold the kitchen radio slanted, with the two
recesses in the retaining lugs on the mounting
plate q. Press the kitchen radio upwards until
it audibly engages.
Secure the wire antenna with a piece of adhesive
tape such that it does not hang down.
Setting up the kitchen radio
Do not set the kitchen radio up without the mounting
plate q. Otherwise the speakers are covered and
the sound is scarcely audible.
To set up the kitchen radio with the enclosed mounting
plate q:
1. Simultaneously press the two retaining levers w
on the back of the appliance down. Push the
mounting plate qback and remove it.
2. Push the two retainer lugs on the mounting plate q
into the recesses on the lower rear side of the
kitchen radio.
3. Firmly press the front part of the mounting plate
qdown until you hear it engage. You can now
set up the radio.
To disassemble the mounting plate q, grip the
mounting plate qfrom below with the thumbs and
press it forwards and up until it disengages. You can
now remove the mounting plate q.
Commissioning
Inserting the back-up batteries
The back-up batteries ensure that the programmed
time, date, alarm time and set SDAs (Special Day
Alert) are not erased in the event of a power failure.
For this, you require two 1.5V batteries of type
AAA. They are not supplied with the appliance.
1. Open the lid of the battery compartment a
on the underside of the kitchen radio.
2. Insert the batteries. Make sure the polarities
are correct.
3. Close the lid of the battery compartment a.
The lid must audibly engage.

Note:

The back-up batteries must be checked at least
once per year and, if necessary, exchanged
for new ones.
Providing mains power
• Insert the plug into a power socket. In the
display, the time is indicated by "00:00.00".
To be able to use the alarm functions of the radio,
first of all programme in the date and time, as
described in the following section.
IB_KH2281_Ar5027_LB4 15.07.2008 9:07 Uhr Seite 5