>> Open the battery compartment g on the rear of the device.
>> Insert 4 x 1.5V batteries of the type "C/Baby/LR14" as per the insertion markings shown in the battery compartment g.
>> Pay heed to the correct poling of the batteries, otherwise the device will not function and could even be damaged.
>> Close and secure the battery compartment g .
>> Leaking batteries can cause damage to the radio. If you do not intend to use the device for an extended period, remove the batteries.
Switching the device on and off
>> To switch the device on, turn the On/Off switch - sound volume regulator i clockwise over a small resistance.
>> Press the respective button
>> FM | = Very high frequency o, |
>> MW = Medium wave a, | |
>> LW | = Long wave s, or |
>> SW | = Short wave d, |
>> to select the desired frequency range .
>> For VHF reception, extend the telescope aerial q to its full length and then determine its best positioning.
>> For reception of the remaining frequency ranges, the radio is fitted with a
>> Turn the transmitter calibration TUNING e to receive the desired radio station. Use the station dial for orientation.
>> Select the desired sound volume using the sound volume regulator i.
- 8 -
