6Press the “PLAY/PAUSE” button once to start playback of the programmed compilation of tracks.
To end playback of the compiled tracks press the “STOP” button once. The programmed com- pilation of tracks continues to be stored and the display continues to indicate “PROG”.
To renew playback of the programmed compilation of tracks press the “PLAY/PAUSE” but- ton once again.
To switch off the program function pressthe “STOP” button twice during playback. This ends the program function, “PROG” is faded out on the display and the programmed compilation of titles is deleted.
The player is automatically transferred to STOP mode after all programmed tracks have been played. The programmed tracks continue to be stored until …
•you open the CD compartment
•you switch off the player by depressing the “STOP” button
•the
8.9. Intro play function
The first 10 seconds of all tracks of the loaded CD are played one after the other in the Intro play function.
Proceed in the following manner to switch on the Intro play function …
1If a CD is being played, then end playback by pressing the “STOP” button once.
2Press the “MODE” button three times. “INTRO” appears on the display. Then press the “PLAY/PAUSE” button once to start the Intro play function.
3Then press the “PLAY/PAUSE” button once to start the Intro play function.
To end the Intro play function press the “STOP” button once; “INTRO” is faded out on the dis- play.
