Silvercrest KH 2277 operating instructions Prior to first-time use

ÔPrior to first-time use:

Remove the cardboard transport protection from the CD compartment.

2Insert the jack plug of the supplied earphones into the “PHONES” socket on the right-hand side of the MP3-CD player.

3Place a CD – label side up – on the axle in the middle of the CD compartment. Press the CD down lightly until it is percept-ibly engaged.

4Close the CD compartment by pressing down the cover until it is perceptibly engaged.

5Press the “PLAY/PAUSE” button. “READING” now appears on the display and the MP3-CD player now reads in the information from the loaded CD.

The first trackof the loaded audio CD is then automatically played.

The following is indicated on the display:

ÔInfo

ESP is the abbreviation for “Electronic Shock Protection” system of the Silvercrest KH 2277 portable MP3-CD Player. The ESP system is automatically switched on when playing audio and MP3 CDs. The system ensures that playback of CDs, MP3-CDs, CD-Rs and CD-RWs is not impaired when the player is exposed to shocks and vibrations.

The digital data of the loaded CD, equalling a playback period of 60 seconds, is temporarily stored in a read-ahead memory buffer. As soon as this memory is full – recognisable by the bar in the memory display of the LCD display – the next data from the loaded CD is over- written (once again 60 seconds of playback).

If the player is exposed to a shock during playback, then the data stored in the read-ahead memory buffer is read out for interference-free playback. This gives the laser scanner time to re-stabilise and read in new data from the CD. After the data from the read-ahead memo- ry buffer have been collected, new data are transferred to the memory.

Operating Instructions 15