Silvercrest KH 2296 operating instructions Setting up the kitchen radio, Setting up the appliance

Disassembly

•To disassemble the kitchen radio, press the two retaining levers at the rear of the appliance downwards. Then pull the radio out to the front and remove it.

•Unscrew the screws and remove the assembly plate.

Setting up the kitchen radio

Do not set the kitchen radio up without the mounting plate q. Otherwise the speakers are covered and the sound is scarcely audible.

To set up the kitchen radio with the enclosed mounting plate q:

1.Simultaneously press the two retaining levers on the back of the appliance down.

Push the mounting plate q back and remove it.

2.Push the two retainer lugs on the mounting plate q into the recesses on the lower rear side of the kitchen radio.

3.Firmly press the front part of the mounting plate q down until you hear it engage. You can now set up the radio.

Setting up the appliance

First take all appliance components from the packaging and remove all packing foil and tape.

Inserting the back-up batteries

The back-up batteries ensure that the time, date and alarm time setting are not lost in the event of a power cut. For this you require two 1.5 V batteries of the type AAA/Micro.

They are not supplied.

1.Open the lid of the battery compartment o on the under- side of the kitchen radio.

2.Insert the batteries. Make sure the polarities are correct.

3.Close the lid of the battery compartment o.

The lid must audibly engage.

Note:

The back-up batteries must be checked at least once per year and, if necessary, exchanged for new ones.

- 7 -