TL H.264 DVR User’s Manual

2.System Setup

The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit.

In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is highly recommended

2.1Position the DVR

First, note to position / mount the DVR in a proper place and be sure to power off the unit before making any connections. The placed location should avoid hindering or blocking the unit from airflow. Enough airflow is needed to protect the unit from overheating. The maximum allowable temperature of operating environment is 40°C.

The unit utilizes heat-conducting techniques to transfer internal heat to the case, especially to the bottom side of the unit.

NOTE: Be sure the rubber feet are not removed, and always leave a space for air ventilation on the unit’s bottom side.

2.2Select Video Format

The DVR is designed to operate under either NTSC or PAL video formats. The switch is on the rear panel.

12

Page 13
Image 13
Speco Technologies 4TL specifications System Setup, Position the DVR, Select Video Format