TL H.264 DVR User’s Manual
NTP Server
Enter this item to setup a feasible time server. The default time server is time.nist.gov. Users can change it to any other time server if desired. IP addresses of other time servers are listed below for reference.
129.6.15.28 | 129.6.15.29 | 132.163.4.101 |
132.163.4.102 | 132.163.4.103 | 128.138.140.44 |
192.43.244.18 | 131.107.1.10 | 69.25.96.13 |
206.246.118.250 | 208.184.49.9 | 64.125.78.85 |
207.200.81.113 | 64.236.96.53 | 68.216.79.113 |
Automatically Time Sync
Select <ON> and the time will be synced once an hour.
NOTE: If users want the unit to automatically synchronize the local time, the <Time Zone> item MUST NOT be set to <OFF>, or the function cannot be activated.
Manually Time Sync
Select <Yes> to sync the time immediately.
5.1.4Unit Name
Users are allowed to assign a unit name, up to 11 characters, to
Follow the steps below to edit the unit name.
•Select <Unit Name> from System Setup menu and press ENTER. A virtual keyboard displays as below.
|
|
|
| Unit Name | |
A B C D E F G H I J K L M | |||||
N O P Q R S T U V W X Y Z | |||||
a | b | c | d | e f g h | i j k l m |
n | o | p | q | r s t u | v w x y z |
0 | 1 | 2 | 3 4 5 | 6 | 7 8 9 . ! @ | |
# | − | _ | , “ | + | = | * |
|
| ◄ | ► | Backspace Delete | ||
|
| Cancel | OK |
| ||
•Use Direction keys to move the cursor to the wanted character.
•Press ENTER to add the character to the entry field (up to 11 characters).
•When the unit name is entered, move the cursor to <OK> and press ENTER to save the settings and exit.
48
