TL H.264 DVR User’s Manual
5.4.4.5Event Qlty
This item is used to set the picture size for event status recording. The available options are: <Low>, <Fair>, <Mid>, <High> and <Best>.
5.4.4.6Event Active
Users are allowed to choose which alarm type needs to be recorded. The available options are <Alarm> (alarm events only), <Motion> (motion detection events only) and <Both> (alarm event + motion detection), and <None>. The default setting is <Both>, which includes Alarm and Motion events recording.
5.4.5ezRecord Setup
This item aims to ease the complicated record settings, and to make the setup much easier. Note that this item can be accessed only when <ezRecord> is selected as the option for <Preset Config>.
Select <ezRecord Setup> from <Record Setup> and press ENTER, the menu is displayed as below:
|
| ezRecord Setup |
|
|
| How Many Days To Record | 2 Days | ||
| Daytime Record | Yes | ||
| Night Record | Yes | ||
| Weekend Record | Yes | ||
|
| Record Info |
|
|
|
| 7.5 |
| |
|
|
|
| |
| Average Normal PPS |
| ||
| Average Normal Quality | Best | ||
Follow these steps to Setup ezRecord:
•Select <How Many Days To Record> and press ENTER, then press UP/DOWN to select a desired number of days. The average normal PPS & quality will be adjusted automatically. The maximum recording days depends on the storage size of the HDD. In other words, the larger the storage size, the more days the DVR can record.
•Move to <Daytime Record> and press ENTER. This item is for users to select whether the DVR will record during daytime. If yes, use UP/DOWN to select <Yes> to enable daytime recording; or select <No> to disable.
•Repeat the same procedures for <Night Record> and <Weekend Record>, respectively. Note that <Weekend Record> will be inaccessible if <Weekend Schedule> in <Schedule Setup> is set to <OFF>.
69
