System Setup Controls
SYSTEM MENU
The System Setup controls many aspects of the functionality in the DVR, including the Password, Time and Date, Network and PTZ setup.
Use the ▲▼ arrows to navigate through the
settings, and the ◄► arrows to change the values. Press the ENTER button to enter a submenu, and press the MENU/EXIT button to return to the previous menu.
OVERWRITE – If the Overwrite option is set to Yes, when the Hard Drive becomes full the system will begin overwriting the older information. If Overwrite is set to No, then the DVR will stop recording when the Hard Drive becomes full.
FORMAT HDD – Formatting the Hard Drive erases all stored video data (firmware settings are not erased). When you choose to Format the drive, the system will prompt you for the password before formatting (The default password is [111111] ).
NOTE: Once the drive has been formatted, you will no longer have access to the previously recorded data, and there is no recovery.
HARD DISK SETUP SUBMENU
The Hard Disk Setup contains information about the installed Hard Drive (Total Hard Drive Space, and Space Used), and allows the user to Set the Overwrite and Format the drive.
PASSWORD CHANGE SUBMENU
The Password Change submenu allows the user to change the system password.
Any combination of buttons on the front panel of the DVR can be used in the new password. Enter the new characters, and press the Enter button to finish.
A Password Changed message will be shown on screen when the password is successfully changed in the system.
28