System Setup Controls
RECORD SETUP
The Record Setup controls the settings for Recording for the DVR.
Use the ▲▼ arrows to navigate through the
settings, and the ◄► arrows to change the values. Press the MENU/EXIT button to return to the previous menu.
RECORD SPEED SUBMENU
The Record Speed Submenu controls the Frames per second (FPS) used for each channel.
(L208 Series menu shown)
The total available Frame Rate is 60 FPS. These frames are shared across all channels, and can be divided according to channel importance.
For example, a camera pointed at the front door may require a higher frame rate (i.e. 15 FPS) than a camera that is monitoring a low traffic area (i.e. 7 FPS).
RECORD QUALITY
Set the RECORD QUALITY to LOW, NORMAL or HIGH. This setting is the same for all channels.
•With a higher Recording Quality, the image will appear clearer during playback; however more storage space will be required on the Hard Drive to save the video.
•With a lower the Recording Quality, the image will appear less clear during playback; however less space storage space will be required on the Hard Drive to save the video.
EVENT REC DURATION
Set the Recording Duration when an EVENT (sensor / motion) is detected on the system. Set the duration to 5, 10, 15, 20, 25 or 30 seconds.
RECORD SCHEDULE SUBMENU
The Recording Schedule is based on a
24
