System Setup Controls
MOTION DETECTION SETUP
The Motion Detection Setup controls the behavior of the DVR when Motion is detected.
Use the ▲▼ arrows to navigate through the
settings, and the ◄► arrows to change the values. Press the MENU/EXIT button to return to the previous menu.
CHANNEL
Switch between CH1~CH4 (L204 Series) or CH1~CH8 (L208 Series) to change the settings for the individual channel.
SENSITIVITY
This setting adjusts the sensitivity of the pixel based motion detection on the DVR. Set the option to 1 (low sensitivity) to 4 (high sensitivity, or OFF.
MOTION AREA SUBMENU
Use the Motion Detection area to determine which areas of the image will detect motion. Areas shaded with a darker color indicate that the area is selected to detect motion.
Using the Front Panel Buttons:
1.Use the front panel arrows ▲▼◄► to navigate to the desired starting location.
2.Press the Enter button once. Use the arrows to drag the block to the desired area coverage.
3.Press the Enter button to stop setting the motion area.
ALARM DURATION
Determines how long an alarm lasts after detection. Settings include: OFF, 05, 10, 15, 20, 25, 30 Seconds or CONT (continuously).
If there are no sensors connected to the DVR, set the Alarm Duration to OFF.
NOTE: Only one blocked section can be set on the Detection Area. Multiple selections cannot be added.
Using a Mouse:
1.Press and hold the left mouse button
2.Drag to select the detection area
NOTE: Click the arrow icon to set the entire area for motion detection.
26