System Setup Controls
System Setup Controls
•Enter the SYSTEM MENU screen by pressing the MENU/EXIT button. Enter the password to display the Menu Selection Screen.
•Scroll through the 11 options by pressing the UP & DOWN (▲▼) buttons on the Front Panel or Remote Control.
•To enter a
•To exit a SUBMENU, press the MENU/EXIT button.
•To change the options, press the RIGHT and LEFT buttons (◄►).
•To exit the MAIN MENU, press the MENU/EXIT button. If system changes were made, a prompt will appear to Save Changes when exiting the menu.
CH1Setup
Camera
Record
Sensor
Motion Detection
Screen
Audio
System
CH3 Search
Status
Factory Default
Exit
|
| 100%4 | 07/01/01 | 01:02:03 |
Menu Navigation Controls
•MENU/EXIT Button - Accesses the setup menu, and returns to previous menu options.
•ENTER Button (↵) - Enters a Menu setting
•UP / DOWN Controls (▲▼) - Move Up/Down through the Menu Options.
•LEFT / RIGHT Controls (◄►) - Move Left / Right to change the Menu Settings.
Setup
Camera
Record
Sensor
Motion Detection
Screen
Audio
System
Search
Status
Factory Default
Exit
Setup Menu - Options
The Setup Menu has11 options:
•CAMERA – The camera menu contains the individual camera image settings.
•RECORD – This menu contains the recording settings for Scheduled recording.
•SENSOR – This menu contains the configuration settings for Sensors connected to the DVR Alarm block.
•MOTION DETECTION – Controls the Motion Settings for each channel, including motion detection area
•SCREEN – Contains the settings for the DVR Display and Sequence
•AUDIO – This menu controls the Audio Recording, Input and Output
•SYSTEM – Contains the System Settings, including Hard Drive, Password, Time and Date Settings, Network, PTZ Setup and Firmware Upgrading
•SEARCH – Search the drive for previously recorded video and events
•STATUS – Displays the system settings
•FACTORY DEFAULT – Restores Factory Defaults
•EXIT – Returns to the main viewing screen
20