■Host Setup
Note: Never turn over the order: start with the host reg- istration, and then proceed to the authentication ON/OFF.
1.Open the Host Setup window.
2.Host Registration
•Enter the IP address of the PC.
A hostname.domainname can be entered when using the DNS function.
•Select an access level, and click the SET but- ton. The default setting is level 1.
1(Administrator): Allows you to operate setup menus and to view live and record- ed images.
2(Live Only): Allows you to view live and recorded images.
3.Host Authentication
•Select ON or OFF, and click the SET button. ON: Applies the host authentication.
OFF: Does not apply.
•Click the Delete button after selecting an unwanted host name to cancel it.
•Click the Return button to go back to the main page.
4.Host Deletion
•Select a redundant host number and click the DELETE button.
Notes:
•The host authentication will be carried out first, and the user authentication will be the next if both are set to ON.
•All users will become level 2 if both the host and the user authentications are set to OFF.
•A host unregistered will be unable to access the camera.
■System Setup
1.Open the System Setup window.
2.Time Adjustment
•Enter the date, month, year, and time.
3.LED control
•Select ON or OFF.
ON: Enables the LED to indicate the communi- cation status at the rear panel of the cam- era.
OFF: Disables the LED to indicate the status.
4.Click the SET & REBOOT button.
