Connection type 2 | IP address | Set the IP address designated by your network administrator. |
|
| However, the setting is not required if DHCP is used in an |
|
| intranet. |
|
|
|
| Subnet mask | Set the subnet mask designated by your network administra- |
|
| tor. |
|
| However, the setting is not required if DHCP is used in an |
|
| intranet. |
|
|
|
| Default gateway | Set the IP address of the default gateway designated by your |
|
| network administrator. |
|
| However, the setting is not required if DHCP is used in an |
|
| intranet. |
|
|
|
| Network speed | Set the network speed. |
|
| Use the default setting “auto” for the network speed. |
|
| Selectable parameters: auto (default setting), 100 Mbps (full |
|
| duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 |
|
| Mbps (half duplex) |
|
|
|
| HTTP port | Use the default setting “80” for the HTTP port. |
|
|
|
| Host name | Refer to your network administrator and set the designated |
|
| host name if required. |
|
|
|
| DNS | Set to ON when using the DNS server. |
|
|
|
| Primary server | No setting required |
|
|
|
| Secondary server | Set the IP address of DNS when using the DNS server. |
|
| Refer to your Internet service provider for the IP address of |
|
| DNS. Primary and secondary IP addresses can be set for the |
|
| DNS. |
|
|
|
| DHCP | Set to ON if the intranet uses DHCP. |
|
|
|
Connection type 3 | IP address | Set the IP address designated by your Internet service |
|
| provider. |
|
| However, the setting is not required if your Internet service |
|
| provider uses a DHCP server (the DHCP server assigns an |
|
| IP address to the camera automatically). |
|
|
|
| Subnet mask | Set the subnet mask designated by your Internet service |
|
| provider. |
|
| However, the setting is not required if your Internet service |
|
| provider uses a DHCP server (the DHCP server assigns an |
|
| IP address to the camera automatically). |
|
|
|
| Default gateway | Set the default gateway designated by your Internet service |
|
| provider. |
|
|
|
| Network speed | Set the network speed. |
|
| Use the default setting “auto” for the network speed. |
|
| Selectable parameters: auto (default setting), 100 Mbps (full |
|
| duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 |
|
| Mbps (half duplex) |
|
|
|
| HTTP port | Use the default setting “80” for the HTTP port. |
|
|
|
| Host name | Refer to your Internet service provider and set the designated |
|
| host name if required. |
|
|
|
| DNS | Set to ON when using the DNS server. |
|
|
|
| Primary server | No setting required |
|
|
|
