Canceling Alarm Display, VMD Setup, Enter | Panasonic WV-NP472E

■Canceling Alarm Display

“Alarm” display in the upper right corner will disappear when you operate the following.

•Click the Return button after once opening Alarm List.

Or

•Click the Return button after opening any of setup menus.

■VMD Setup

You can setup VMD (video Motion Detector).

●Detection Area Setup

1.In the main page, click the Camera Menu button. The menu control buttons appear under the image display area.

2.Click the Menu ON button.

**SET UP ** will be overlaid on the camera picture.

3.Move the cursor to CAMERAO and click ENTER.

**CAM SET UP ** appears.

4.Move the cursor to MOTION DET and turn it to ON with the right or left button, and click ENTER.

The ** MOTION DETECT ** appears.

5.Move the cursor to MASK SETO, and click the

ENTER.

Detection map is split into 48 areas with status indi- cations for each.

-39-

Image 39

Panasonic WV-NP472E operating instructions Canceling Alarm Display, VMD Setup, Detection Area Setup, Enter

Contents

Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp Preface Never face the camera toward the sun PrecautionsClean the CCD faceplate with care Handle the camera with care Major Operating Controls and Their Functions Installations Replacement of Auto Iris Lens ConnectorMounting the Lens Notes Pictures Upside-down Flange-back AdjustmentMounting from the Bottom Mounting from the Top Video Cable Connections Power-in ConnectionsConnections Control Terminal Connections Connection to Internet Type Connection to Intranet Type Access from the PC Preliminary SetupOperating the Camera Access from the Camera/System Device Network Speed Select a speedFunction Comparison / PC Network vs. Camera site ¡From the PC Prior to SET UPButtons Used for Setup Menus Camera Setup Menus ¡From the Camera Camera Identification Camera ID Setting Setting Procedures ALC Mode with SUPER-D2 on Light Control Setting ALC/ELC Shutter Speed Setting Shutter Gain Control Setting AGC on DNR-H, DNR-L/OFFALC Mode with SUPER-D2 OFF and ELC Mode ATW1 Auto-Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Electronic Sensitivity Enhancement Sens UP Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETLens Drive Signal Selection Lens Drive Date Display Clock Setting Special Menu Http Port Number To reset to the factory settings Camera Reset Connection to Intranet Type SET UP from the PCConnections Connection to Internet Type Network Setup of the PC Network Setup of the Camera Dhcp Network Setup Parameters vs. Connection TypeConnection type Description of the parameter DNS Set to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Return button Setup Menu buttonDay & Night Mode Setup buttons ON/OFF/AUTO Reset button ALL Reset Camera Setup Menus PC Oriented SET UP Alarm Setup Image SetupImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host Setup Initializing Html Files Initializing the Setup MenuInitializing Initializing the Camera Menu Viewing Pictures Image Quality SelectionImage Capture Size pixels 752x568 Monochrome Mode Alarm Functions When an Alarm ArisesTransferring Picture Files Enter Canceling Alarm DisplayVMD Setup Detection Area Setup Reviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output Control Troubleshooting Camera Section SpecificationsGeneral Network Section Optional Accessories Standard Accessories 2003