PC Oriented SET UP, Alarm Setup Image Setup | Panasonic WV-NP472E

PC ORIENTED SET UP

Setup windows listed below are accessible only from the PC. Operations in these windows are described in the following pages.

Click any of the setup selection buttons on top of the screen to open the desired window.

The following are opened from the Network Setup win- dow.

Image Setup

Alarm Setup FTP Client Setup

User Authentication Setup

Host Authentication Setup

System (Date & LED) Setup

Quality of Image: Super Fine, Fine, Normal, and Rough

Bandwidth Control: 32 kbps, 64 kbps, 128 kbps, 256 kbps, 512 kbps, 1024 kbps, and Unlimited

3.Click the SET & REBOOT button.

It will take about 5 seconds to complete the reboot.

4.Click the Return button to go back to the main page.

*: The 752 x 280 selection is good to display moving images without aliasing, while 752 x 568 selection is good to display motionless images.

■ Alarm Setup

■Image Setup

1.Open the Image Setup window.

2.Select the parameter for each item.

Refresh Interval: Fast, Middle, Slow, and Very Slow

Image Capture Size (pixels): 752x568*, 752x280, 368x280, 176x136

-31-

Image 31

Panasonic WV-NP472E PC Oriented SET UP, Alarm Setup Image Setup, Image Capture Size pixels 752x568*, 752x280, 368x280

Contents

Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp Preface Never face the camera toward the sun PrecautionsClean the CCD faceplate with care Handle the camera with care Major Operating Controls and Their Functions Replacement of Auto Iris Lens Connector InstallationsMounting the Lens Notes Pictures Upside-down Flange-back AdjustmentMounting from the Bottom Mounting from the Top Video Cable Connections Power-in ConnectionsConnections Control Terminal Connections Connection to Internet Type Connection to Intranet Type Preliminary Setup Access from the PCOperating the Camera Network Speed Select a speed Access from the Camera/System DeviceFunction Comparison / PC Network vs. Camera site ¡From the PC Prior to SET UPButtons Used for Setup Menus Camera Setup Menus ¡From the Camera Camera Identification Camera ID Setting Setting Procedures ALC Mode with SUPER-D2 on Light Control Setting ALC/ELC Gain Control Setting AGC on DNR-H, DNR-L/OFF Shutter Speed Setting ShutterALC Mode with SUPER-D2 OFF and ELC Mode ATW1 Auto-Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Electronic Sensitivity Enhancement Sens UP Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETLens Drive Signal Selection Lens Drive Date Display Clock Setting Special Menu Http Port Number To reset to the factory settings Camera Reset Connection to Intranet Type SET UP from the PCConnections Connection to Internet Type Network Setup of the PC Network Setup of the Camera Dhcp Network Setup Parameters vs. Connection TypeConnection type Description of the parameter DNS Set to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Return button Setup Menu buttonDay & Night Mode Setup buttons ON/OFF/AUTO Reset button ALL Reset Camera Setup Menus Alarm Setup Image Setup PC Oriented SET UPImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host Setup Initializing Html Files Initializing the Setup MenuInitializing Initializing the Camera Menu Image Quality Selection Viewing PicturesImage Capture Size pixels 752x568 Monochrome Mode When an Alarm Arises Alarm FunctionsTransferring Picture Files Enter Canceling Alarm DisplayVMD Setup Detection Area Setup Reviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output Control Troubleshooting Camera Section SpecificationsGeneral Network Section Optional Accessories Standard Accessories 2003