Monochrome Mode | Panasonic WV-NP472E specification

■Monochrome Mode

You can switch the camera between the colour mode and black-and-white mode. This may help picture become clear under conditions of insufficient lighting.

1. In the main page, click the Camera Menu button.

2.The Day & Night button appears in the lower-left of the screen.

ON: Selects black-and-white mode.

OFF: Selects colour mode.

AUTO: Selects colour mode when picture is bright enough, or black-and-white mode when it is dark.

3.Click ENTER.

4.Click the Return button to go back to the main page.

Notes:

•Switching to black-and-white will be disabled e in the following cases.

1.The camera setup menu is displayed. (Click Menu OFF.)

2.EXT is set for B/W in the special menu. (Select other than EXT.)

•AUTO1 will perform if AUTO is set in this menu, although in the special menu AUTO2 is set for B/W.

-37-

Image 37

Panasonic WV-NP472E operating instructions Monochrome Mode

Contents

Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp Preface Clean the CCD faceplate with care PrecautionsHandle the camera with care Never face the camera toward the sun Major Operating Controls and Their Functions Replacement of Auto Iris Lens Connector InstallationsMounting the Lens Notes Mounting from the Bottom Flange-back AdjustmentMounting from the Top Pictures Upside-down Connections Power-in ConnectionsControl Terminal Connections Video Cable Connections Connection to Internet Type Connection to Intranet Type Preliminary Setup Access from the PCOperating the Camera Network Speed Select a speed Access from the Camera/System DeviceFunction Comparison / PC Network vs. Camera site Buttons Used for Setup Menus Prior to SET UPCamera Setup Menus ¡From the PC ¡From the Camera Camera Identification Camera ID Setting Setting Procedures ALC Mode with SUPER-D2 on Light Control Setting ALC/ELC Gain Control Setting AGC on DNR-H, DNR-L/OFF Shutter Speed Setting ShutterALC Mode with SUPER-D2 OFF and ELC Mode Auto-Tracing White Balance Mode ATW White Balance Setting White BALElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White Balance Lens Drive Signal Selection Lens Drive Motion Detector Setting Motion DETDate Display Clock Setting Manual Fine Adjustment for AWC ATW Special Menu Http Port Number To reset to the factory settings Camera Reset Connections SET UP from the PCConnection to Internet Type Connection to Intranet Type Network Setup of the PC Network Setup of the Camera Connection type Description of the parameter Network Setup Parameters vs. Connection TypeDNS Dhcp Set to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Day & Night Mode Setup buttons ON/OFF/AUTO Setup Menu buttonReset button ALL Reset Return button Camera Setup Menus Alarm Setup Image Setup PC Oriented SET UPImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host Setup Initializing Initializing the Setup MenuInitializing the Camera Menu Initializing Html Files Image Quality Selection Viewing PicturesImage Capture Size pixels 752x568 Monochrome Mode When an Alarm Arises Alarm FunctionsTransferring Picture Files VMD Setup Canceling Alarm DisplayDetection Area Setup Enter Reviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output Control Troubleshooting General SpecificationsNetwork Section Camera Section Optional Accessories Standard Accessories 2003