2.Common Setup
•Enter the FTP server address.
A hostname.domainname can be entered when using the DNS function.
•Enter the user name with a maximum of 16 characters.
•Enter the password with a maximum of 16 characters.
•Select a transmission mode from Sequential or Passive. Passive is recommended when Sequential does not perform properly.
•Complete the schedule 1 and 2, by specifying the transmission time zone and the day of a week.
3.None Alarm (FTP) Image Transmission Setup
•Select ON or OFF to transmit ordinary image files except during an alarm event.
ON: Transmits files when a scheduled time comes.
OFF: Does not transmit, and no schedule is applied.
•Enter a receiver directory.
•Enter a file name and click a radio button.
Fix: Uses repeatedly a single file name when overwriting new data.
Date & Time: Creates and attaches a serial number and a
•Set a transmission interval.
Available time (seconds): 0.2 - 0.9, 1 - 1 440
Available time (minutes): 1 - 1 440
Notes:
•Transmission interval may be delayed depend- ing on the network speed and/or traffic condi- tions.
•The alarm image precedes the
4.Alarm (FTP) Image Transmission Setup
The alarm setup window specifies the profile of the transmitting files such as the numbers of files and the frame rate (fps).
•Select ON or OFF to transmit the image files. ON: Transmits the files when an alarm oper-
ates.
OFF: Does not transmit.
•Enter a receiver directory.
•Enter a file name.
5.Click the SET & REBOOT button.
6.Click the Return button to go back to the main page.
■User Setup
1.Open the User Setup window.
2.User Registration
•Enter to 16 characters of user name. The default setting is “admin”.
•Enter a password. The default setting is a blank.
•Enter a password again.
•Select an access level, and click the SET but- ton.
1(Administrator): Allows you to operate setup menus and to view live and record- ed images.
2(Live Only): Allows you to view live and recorded images.
3.User Authentication
•Select ON or OFF, and click the SET button. ON: applies the user authentication.
OFF: does not apply.
•Click the Delete button after selecting an unwanted user name to cancel it.
Note: You cannot change admin and level 1 that are registered as the default settings while the password entry is allowed.
