Transparency: Indicates a
Blink: Indicates a
Highlight: Indicates a masked area that has been exempted from detection.
Stripe: Indicates an area already set to masked when the cursor is on it.
6.Move the cursor to an area, and click ENTER.
•The area will change from blinking to highlight- ed (masked), and then to striping.
•The striping area will change to blinking (non- masked).
7.Repeat step 6 until all areas are set.
8.Click the ESC button to return to the ** MOTION DETECT ** menu.
9.VMD demonstration
•To confirm the alarm output function, move the cursor to ALARM, and turn it to ON.
•Move the cursor to DISPLAY MODEO, and click ENTER.
The demonstration starts, and the areas will blink where motion is detected.
Blinking
•Click ENTER to return to the ** MOTION DETECT ** menu.
10.Move the cursor to Level, and adjust the detection level, moving the "I" cursor with the right or left but- ton.
11.Repeat step 9 and step 10 to obtain a proper level setting.
12.To return to ** CAM SET UP **, move the cursor to RET, and click ENTER.
To return to the main page, click the Menu OFF button, then the Return button.
■Reviewing Alarm Pictures
The alarm pictures stored in the camera can be reviewed on the PC.
1. In the main page, click the Alarm List button.
2.Click the desired event in the list.
The events can be stored in chronological order from 1 up to 100, and the oldest event will be erased when the new one is added.
The event followed by an icon contains picture file(s).
