Auxiliary Output Control | Panasonic WV-NP472E specification

AUXILIARY OUTPUT CONTROL

■Auxiliary Output Control

You can turn on or off the connected device, for exam- ple a lamp that is connected to the AUX OUT terminal of the camera.

1.Open the auxiliary output control window clicking the AUX Output Control button in the main page.

2.Select the polarity to switch on or off the connected device.

High: Supplies high voltage.

Low: Supplies low voltage.

3.Click the EXE button.

4.Click the Return button to go back to the main page.

Note: The initial state is HIGH when the camera is turned on.

-42-

Image 42

Panasonic WV-NP472E operating instructions Auxiliary Output Control

Contents

Operating Instructions Risk of Electric Shock Do not Open Contents Preface TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp Handle the camera with care PrecautionsClean the CCD faceplate with care Never face the camera toward the sun Major Operating Controls and Their Functions Installations Replacement of Auto Iris Lens ConnectorMounting the Lens Notes Mounting from the Top Flange-back AdjustmentMounting from the Bottom Pictures Upside-down Control Terminal Connections Power-in ConnectionsConnections Video Cable Connections Connection to Intranet Type Connection to Internet Type Access from the PC Preliminary SetupOperating the Camera Access from the Camera/System Device Network Speed Select a speedFunction Comparison / PC Network vs. Camera site Camera Setup Menus Prior to SET UPButtons Used for Setup Menus ¡From the PC ¡From the Camera Setting Procedures Camera Identification Camera ID Setting Light Control Setting ALC/ELC ALC Mode with SUPER-D2 on Shutter Speed Setting Shutter Gain Control Setting AGC on DNR-H, DNR-L/OFFALC Mode with SUPER-D2 OFF and ELC Mode Electronic Sensitivity Enhancement Sens UP White Balance Setting White BALAuto-Tracing White Balance Mode ATW ATW1 Auto-Tracing White Balance Date Display Clock Setting Motion Detector Setting Motion DETLens Drive Signal Selection Lens Drive Manual Fine Adjustment for AWC ATW Special Menu To reset to the factory settings Camera Reset Http Port Number Connection to Internet Type SET UP from the PCConnections Connection to Intranet Type Network Setup of the PC Network Setup of the Camera DNS Network Setup Parameters vs. Connection TypeConnection type Description of the parameter Dhcp Set to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Reset button ALL Reset Setup Menu buttonDay & Night Mode Setup buttons ON/OFF/AUTO Return button Camera Setup Menus PC Oriented SET UP Alarm Setup Image SetupImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup Host Setup System Setup Initializing the Camera Menu Initializing the Setup MenuInitializing Initializing Html Files Viewing Pictures Image Quality SelectionImage Capture Size pixels 752x568 Monochrome Mode Alarm Functions When an Alarm ArisesTransferring Picture Files Detection Area Setup Canceling Alarm DisplayVMD Setup Enter Reviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output Control Troubleshooting Network Section SpecificationsGeneral Camera Section Standard Accessories Optional Accessories 2003