Initializing the Camera Menu | Panasonic WV-NP472E manual

INITIALIZING

You can reset the following data back to the factory default settings.

Camera Setup

Setup Menu (PC oriented) HTML files

■Initializing the Camera Menu

•Move the cursor to CAMERA RESET.

•Hold down simultaneously L and M buttons for 2 seconds on the camera, or click the All Reset button on your computer display.

■Initializing the Setup Menu

•In the power-on state, press the side panel buttons, J and K simultaneously while holding down the rear panel button A.

Hold down the button A for 6 seconds. It will take about 10 seconds to complete the initializing. Be sure to continue supplying power to the camera while initializing.

Notes:

•Clock calibration is required even after initializ- ing the setup menu.

•Try again if the previous initializing failed.

■Initializing HTML Files

•In the power-on state, press the side panel buttons, J and K simultaneously while holding down the rear panel button B.

Hold down the button B for 6 seconds. It will take about 10 seconds to complete the initializing. Be sure to continue supplying power to the camera while initializing.

Notes:

•Never press both the buttons A and B at a time.

•Try again if the previous initializing failed.

-35-

Image 35

Panasonic WV-NP472E Initializing the Camera Menu, Initializing the Setup Menu, Initializing Html Files

Contents

Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp Preface Never face the camera toward the sun PrecautionsClean the CCD faceplate with care Handle the camera with care Major Operating Controls and Their Functions Mounting the Lens Notes InstallationsReplacement of Auto Iris Lens Connector Pictures Upside-down Flange-back AdjustmentMounting from the Bottom Mounting from the Top Video Cable Connections Power-in ConnectionsConnections Control Terminal Connections Connection to Internet Type Connection to Intranet Type Operating the Camera Access from the PCPreliminary Setup Function Comparison / PC Network vs. Camera site Access from the Camera/System DeviceNetwork Speed Select a speed ¡From the PC Prior to SET UPButtons Used for Setup Menus Camera Setup Menus ¡From the Camera Camera Identification Camera ID Setting Setting Procedures ALC Mode with SUPER-D2 on Light Control Setting ALC/ELC ALC Mode with SUPER-D2 OFF and ELC Mode Shutter Speed Setting ShutterGain Control Setting AGC on DNR-H, DNR-L/OFF ATW1 Auto-Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Electronic Sensitivity Enhancement Sens UP Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETLens Drive Signal Selection Lens Drive Date Display Clock Setting Special Menu Http Port Number To reset to the factory settings Camera Reset Connection to Intranet Type SET UP from the PCConnections Connection to Internet Type Network Setup of the PC Network Setup of the Camera Dhcp Network Setup Parameters vs. Connection TypeConnection type Description of the parameter DNS Set to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Return button Setup Menu buttonDay & Night Mode Setup buttons ON/OFF/AUTO Reset button ALL Reset Camera Setup Menus Image Capture Size pixels 752x568*, 752x280, 368x280 PC Oriented SET UPAlarm Setup Image Setup FTP Client Setup User Setup System Setup Host Setup Initializing Html Files Initializing the Setup MenuInitializing Initializing the Camera Menu Image Capture Size pixels 752x568 Viewing PicturesImage Quality Selection Monochrome Mode Transferring Picture Files Alarm FunctionsWhen an Alarm Arises Enter Canceling Alarm DisplayVMD Setup Detection Area Setup Reviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output Control Troubleshooting Camera Section SpecificationsGeneral Network Section Optional Accessories Standard Accessories 2003