Searching the desired picture (continued)
Search by Alarm List
This unit stores the start time of alarm recording and emergency recording in the alarm list when such recording begins. This item is used to search the desired picture using the list of alarm recording (emergency recording). The search result displays in still frame playback of the single screen display.
User Menu
1 Search
steps 1, 2
3Search by Alarm List
step 3
DAlarm List
step1. Set the month, date, year, hour, minute, second, and sensor number to be searched.
Latest: Displays the date and time of the latest recording.
step2. Select “Alarm List.”
The alarm list may take longer time to display completely when there are many items in the list.
The displayed alarm list shows the list of alarm recordings
which have been started before and closest to the specified time.
step3. Select the alarm list you want to display.
To change the source device to be searched, set the de- sired device in the <Select Source Device>. (User Menu 
Search)
To execute alarm list search while the “Alarm area” and “LPA area” are set, set the playback area to “Alarm” and “LPA” respectively.
“Sensor” display indicates the sensor number to which the alarm signal is input.
When repeat recording setting for normal and alarm areas are set to “Repeat Off” and there is an alarm recording (emergency recording) at the end of the HDD, that recording may not be stored in the alarm list and that item may be missed.
When the data of the camera number which is not corresponded to the alarm sensor number is copied to the external media, the alarm list of that data is not exactly similar to that of listed in the digital recorder.
When the detection of the motion or the ground of the
ALARM IN terminal occurs numerously at the same time, not all the start times of the alarm recording may be registered in the alarm list. In this case, the sensor of the lowest number is registered in the list.
In the alarm list, items with the ALARM IN terminal
grounded are indicated in orange, items that were detected with motion are indicated in white, items with the EMERGENCY terminal grounded are indicated in magenta, and items that were input with alarm signal via communication are indicated in green.
To clear the alarm list, erase the HDD data of which the
alarm recording is recorded (System Menu 
Data Clear). Beware that executing it erases all the data of the HDD containing the picture data.
Alarm list search is not performed if there are no index signals.
When alarm recording (emergency recording) is started
while displaying the <Alarm List>, you must first exit the <Alarm List> and then display it again. The new item is added to the list. In this case, you may have to specify the date and time to be searched again.
For alarm list search of LPA area, the list from the start
point of media is displayed when selecting “To latest,” and the list from the end point of media is displayed when selecting “ To oldest.”
18
