Solid State Monitor System
It keeps an eye on things for you.
@Red signal light flashes to tell you when either door is open.
@Green signal light tells you[hat the Door Alarm beeper has been set to sound after either door has been open 30 seconds.
@Red signal light tells you when freezer foodkeeping temperature is above normal.
@Green lighted word NORMAL indicates that no failure has been detected by the diagnostic system.
@Flashingdiagnosticcodes in the display warn you when:
❑frozen foods should be checked.
m
Epower has been interrupted.
❑icemaker may not be operating properly.
❑- defrost system has failed.
❑freezer control may need to be set for a colder temperature.
What these codes
@Status Check pad puts a review of the electronic diagnosis of five coded functions at your fingertip and also allows you to erase codes from display.
@Electronic control allows you to turn night light in
When your refrigerator is first plugged in.. .
All panel lights come on for five seconds, a beep sounds, and lights go off except as follows:
●PF tlashes in the display. Touch STATUS
●Green word NORMAL glows.
●Red WARM TEMPERATURE light glows if freezer compartment temperature is higher than normal. It goes off when proper foodkeeping temperature is reached.
●Door alarm beeper is activated and green light on DOOR ALARM pad glows.
●Red DOOR OPEN I ight flashes if either door is open, goes out when doors are shut.
. Night light in