FIRMWARE UPGRADE
FIRMWARE UPGRADE
The DVR supports upgrading the Firmware through a USB Memory Stick.
NOTE: If the system is actively recording, the Firmware Upgrade cannot take place. If recording is in progress, press the STOP button to end the recording before proceeding with the firmware upgrade.
1.Download the new firmware from http://www.lorexcctv.com to the PC.
2.Copy the firmware files to a USB Memory Stick.
3.Insert the Memory Stick into a USB Port on the DVR.
4.Navigate through the System Menu: SETUP Menu => SYSTEM Menu =>
F/W UPGRADE.
NOTE: If a USB Memory Stick is not detected by the system, a failure message will appear:
The message FIRMWARE UPLOADING... will appear during the upgrade process. Once the upgrade is completed, the system will reboot.
After the system has rebooted, the initial loading screen displays the new firmware version.
If the USB Memory Stick is detected with valid Firmware files, the following screen will appear displaying the Current Firmware Version and the New Firmware Version:
Press the PLAY Button to update the firmware, or press the STOP Button to cancel.
NOTE: Once the system has started the Firmware Upgrade, DO NOT remove the USB Memory Stick until after the system has rebooted and reloaded to the Live Monitoring screen.
To confirm that the Firmware has been upgraded successfully, check the new version on the loading screen.
8CH STANDALONE DVR LOREX
(FW:2.50.85 UCODE:86)
VIDEO: NTSC
DISK0: 78533MB HD7280PLAT20
NEW DISK DISK1: NONE
DISK0: PRESS [PLAY] FORMAT [STOP] CANCEL
FORMAT … DONE.
CD DRIVE:
40
