System Setup Controls
ENG
PASSWORD ENABLE
The Password Enable feature turns the use of a system password ON or OFF. If the option is set to YES, the password is required when entering the Setup Menu, Resetting Factory Defaults, Using the PTZ and Stopping video recording.
TIME SET SUBMENU
The Time Set menu controls the date and time for the DVR.
•TIME ZONE – Set the current time zone by scrolling through available options (GMT based timezones).
•TIME SET – Use the arrows to adjust the Date and Time (YYYY/MM/DD HH:MM:SS). Press the Menu/Exit button to finish changing the settings.
•APPLY – Select the Apply option and press the ENTER button to save the changes to the date and time.
•SYNC. FROM NTP SERVER – Synchronizes the system with a Network Time Server (over the Internet ) to set the date and time. An internet connection is required.
•NTP SERVER IP – Enter the IP address of the Time Server. The default value time server IP is 203.117.180.36.
SYSTEM EVENT LIST SUBMENU
The Event List provides a detailed listing of the events that have occurred in the system.
The Event List includes:
•DVR Power ON / OFF
•Recording Start / Stop
•Sensor ON / OFF
•Motion Detection
•Timed Recording Start / Stop
The list is displayed by Event Number, Date, Time and Event type.
Navigate through the events using the arrow buttons.
To Playback a valid event, select the event from the list and press the ENTER button.
29
