System Setup Controls
ENG
SCREEN SETUP
The Screen Setup controls the onscreen display of the DVR.
Use the ▲▼ arrows to navigate through the
settings, and the ◄► arrows to change the values. Press the MENU/EXIT button to return to the previous menu.
BORDER
The border is the white line that appears around each channel. Set the option to ON (displays the boarder) or OFF (no boarder).
VIDEO ADJUSTMENT SUBMENU
Use the Video Adjustment to change the position of the entire screen, using the ▲▼◄► arrow keys.
AUDIO SETUP
The Audio Setup adjusts the Audio input/output of the DVR system.
Use the ▲▼ arrows to navigate through the settings, and the ◄► arrows to change the values. Press the MENU/EXIT button to return to the previous menu.
RECORD
Set Record to ON to enable sound recording (when a microphone is attached into the AUDIO INPUT port on the system.
NOTE: The audio is shared across the entire system, and cannot be set for a specific channel (i.e. if an audio device is connected near Channel 4, the same audio will be recorded on all channels).
SEQUENCE INTERVAL
Set the length of time that each channel will be displayed in full screen during Sequence Mode. The sequence interval can be set between 0 seconds to 7 seconds.
NOTE: Press the FF Button on the front panel to enter Sequence Mode when viewing live video.
MUTE
Set the system mute ON or OFF.
INPUT/OUTPUT VOLUME
Adjust input and output volume levels. Move the slider bar left (low volume) or right (high volume) to change the volume setting.
27