TL H.264 DVR User’s Manual
5.6.6Email Full Screen
This function allows the DVR to display the alarm channel in full screen size when an alarm is triggered.
Select <None> to disable this function; select <Main> to display the alarm channel on Main Monitor when an alarm is triggered; select <Call> to display the alarm channel on Call Monitor; and select <Both> to display the alarm channel on both Main Monitor and Call Monitor.
5.6.7Event Duration
This item determines the duration of the buzzer and Alarm Out relay function after an alarm is triggered. The available event duration range is from 5 second to 999 seconds.
5.6.8Per Channel Config
This menu is used to set the Video Loss Detect, Motion Detect and Alarm In / Out function for each channel. The menu is displayed as below.
| Per Channel Config |
|
1. | Channel Select | CH01 |
2. | Video Loss Detect | OFF |
3. | Motion Detect | OFF |
4. | Motion Detect Indicator | ON |
5. | Detection Config | OFF |
6. Alarm In | ||
7. Alarm Out | None | |
5.6.8.1Channel Select
The item is used to select a desired channel for setting the parameters. Move the cursor to <Channel Select> and press ENTER, then select a channel using UP / DOWN keys. Press ENTER again to confirm the selection.
5.6.8.2Video Loss Detect
This item allows users to enable or disable Video Loss as an alarm event. Select <ON> to enable Video Loss alarm events, or <OFF> to disable.
76
