TL H.264 DVR User’s Manual
3.3Power Up / Shutdown the DVR
If the DVR must be shutdown for any reason, please use the proper shut down and power up procedures to avoid damaging the DVR.
Power Up the Unit
Simply plug in the power adapter that came with the package and the DVR will start to boot.
The color bar and system checking information will be shown on the monitor and then disappear when the unit has been completely powered up.
Restart / Shutdown the Unit
Press MENU and input the username and password that has sufficient authority to access the OSD setup menu. Select <Shutdown> in Main Menu and press ENTER to enter the Shutdown menu, which displays as follows.
|
| Shutdown |
1. | Power Off | Execute |
2. | Reboot | Execute |
<Power Off>
Select this item to shut down the unit. Do not remove the power during shut down until the message “You can safely turn off DVR now!” displays.
<Reboot>
Select this item to reboot the unit. The color bar and system checking information are displayed on the monitor until the unit is completely restarted.
20
