TL H.264 DVR User’s Manual
5.6.5Alert Notification Setup
This function allows users to send alert notifications to the CMS program which had been installed to users’ computer. For detailed setup instruction, please refer to the CMS user’s manual.
| Alert Notification Setup |
|
1. Alert Configuration Set | 1 | |
2. | Alert Notification | OFF |
3. | Alert IP | 0.0.0.0 |
4. Alert Port | 9999 | |
5. Alive Interval | 120 Sec | |
5.6.5.1Alert Configuration Set
<Alert Configuration Set> provides 3 combinations of Alert Notification, IP, and Port.
5.6.5.2Alert Notification
Four options are included in this item; <OFF>, <Event>, <Alive>, and <Both>.
<OFF>: The Alert Notification is turned off.
<Event>: When the alarm is triggered, the DVR will send an alert message to the CMS.
<Alive>: The DVR will send an alive message to the CMS every N second just to show you that the connection between the DVR and CMS is in effect. The time interval N can be adjusted in <Alive Interval>.
<Both>: This enables the DVR to send both Event and Alive alert messages to the CMS.
5.6.5.3Alert IP
The Alert IP must match the IP address of the computer.
5.6.5.4Alert Port
The ports for DVR and the CMS Alert MUST be the same.
5.6.5.5Alive Interval
Users can define the time interval (1 to 255 seconds) between each alive message.
75
