Network Time Protocol Setup | Speco Technologies 4TL guide

TL H.264 DVR User’s Manual

3.4.3Network Time Protocol Setup

Time Zone

Select <Time Zone> to enter the time zone. To find out the correct local time zone, please visit www.greenwichmeantime.com or refer to the following figure.

NOTE: The <Time Zone> must be set to the correct local time zone or the <Network Time Protocol Setup> will not be accessible.

Network Time Protocol Setup

After entering the time zone, the <Network Time Protocol Setup> option will appear. Select the <Network Time Protocol Setup> to set the time server. The default time server is time.nist.gov, but the user can change it to other time servers when desired. A list of IP addresses of the time servers is listed below.

129.6.15.28	129.6.15.29	132.163.4.101
132.163.4.102	132.163.4.103	128.138.140.44
192.43.244.18	131.107.1.10	69.25.96.13
206.246.118.250	208.184.49.9	64.125.78.85
207.200.81.113	64.236.96.53	68.216.79.113

After the time server is set, set <Manually Time Sync> to <Yes> to sync the time immediately. The time sync can also be updated periodically. Set <Automatically Time Sync> to <ON>, and the time will be automatically synced once an hour.

23

Image 24

Speco Technologies 4TL specifications Time Zone Network Time Protocol Setup

Contents

DVR4TL/8TL/16TL TL H.264 DVR User’s Manual TL H.264 DVR User’s Manual Important Information Rack Mounting Table of Content Overview System SetupGeneral System Setup Basic Operation 3.1 Dhcp 1.1 TL H.264 DVR User’s Manual Appendix B Remote Controller 103 Remote Monitoring Software Appendix C Setting up a DVR behind a Router 105 Overview System Setup Position the DVRSelect Video Format Connect Devices to the DVR Rear Panel Connections Alarm I/O & RS485 LAN Connector RJ-45USB Connector Power Jack General System Setup Front Panel IntroductionLED Definition Function Keys Direction Keys ESC SEQ Sequence Entering OSD Setup Menu Password Protection Account SetupAuthority Setup Load Default Setting Power Up / Shutdown the DVR Power Up the UnitPower Off Reboot System Date / Time Setting Set Date / TimeSet Date / Time Date / Time Display Daylight Saving Time Network Time Protocol Setup Time Zone Network Time Protocol Setup Record Schedule / Quality Setting Schedule Setup Preset Record Configuration Per Camera ConfigurationDVR-16TL Record Event Video Only Basic Operation View Live / Playback VideoViewing Modes Viewing in Full Screen Digital Zoom View Live CamerasView Recorded Video Freeze Live Image Capture Snapshots Key Usage in PlaybackPause Playback and Single Step Forward Sequence Sequence with Main MonitorSequence with Call Monitor For DVR-16TL only Search Recorded Video Search by Time Calendar Search Search by Event Video Export EzBurn Introduction Export Normal Video Dome Control Export Event VideoDome Connection Dome Protocol Setup 3 RS485 Setup Dome Controlling Keys Setting Preset Points Calling Preset Points Advanced System Configuration Username and Password Key Usage in OSD setup menu Key Usage in Virtual KeyboardTo input characters To move the cursor in title entry System Setup System/Version InfoTo delete current character To exit the virtual keyboard Software Upgrade via Local Device System and Version Information Language Date / TimeDate / Time Date Display Mode Time Display ModeTime Zone Date / Time Display Date/Time Order Daylight Saving Time Setup Network Time Protocol Setup SetupDaylight Saving Time DST Start / End Unit Name NTP ServerAutomatically Time Sync Manually Time Sync Password Protection Account SetupShow Unit Name Network Setup Authority SetupLoad Default Setting LAN Setup LAN Select Netmask GatewayPPPoE Account PPPoE Password Connect At BootingPPPoE Max Idle Network Restart Smtp Setup Trigger PortEmail Address Email via Smtp Smtp Server Smtp PortSmtp Account Ddns Setup Smtp PasswordEnable Ddns Submit/ Update Host NameDdns Port UPnP Setup EzDDNSUPnP UPnP NAT Traversal 8 RS485 Setup Split Mode Audio Audio Output/Key BeepAudio Output Key Beep Monitor Setup Screen Center AdjustVGA Resolution Show Camera Title Camera Setup Show Color BarAnalog Camera Select Dome Protocol Camera Title CovertBrightness Contrast Record Setup Saturation9 Hue Record Mode Setting Record ResolutionRecord Format Max Rec. PPS Day / Night Time Start / End Weekend Schedule Weekend Start / End PAL Camera Select Normal PPSNormal Qlty Event Max PPS EzRecord Setup Event QltyEvent Active Circular Recording Audio Recording Purge Data Purge All DataPurge All Event Data Purge Event Before Sequence Setup Main / Call Monitor DwellMain / Call Monitor Schedule Event Setup Internal BuzzerEvent Icon Email Notice Email Attachment Alert Notification Setup Per Channel Config Email Full ScreenEvent Duration Channel Select Motion Detect Indicator Detection ConfigMotion Detect Alarm Alarm OutSensitivity Block Threshold Database Setup Total / Free Size of HDDAvailable Recording Time Internal Disks Configuration Load Factory DefaultActive Action Import Configuration Export Configuration Configuration Name Copy DestinationBegin Export Select Device Select Channel From / To TimeSelect Events Data Type Export FormatDigital Signature Power Off RebootShutdown Erase Disc Remote Monitoring Software System Requirements Installation of Software Change Internet Settings TL H.264 DVR User’s Manual Install SpecoRemote Login / Logout Software Upgrades Basic OperationView Live Video Select Display Mode Operating Cameras with Dome Control Instant Recording Record Video InstantlyPlayback Instant Recorded Video Playback Video Playback Remote Video Playback Local *.drv Files Playback ControlsIcon Name Description Play / Pause Verify Digital Signature Search from Event ListTake a Snapshot Health Status Normal and Dual Streaming SpecoRemote Troubleshooting Guide IPhone and Smart Phone Monitoring 101 Appendix a Recommended HDDs Brand Model Name Model Number SizeSeagate Maxtor Appendix B Remote Controller 234 235 236 Appendix C Setting up a DVR behind a Router Following is an example of how the router should be set 107