Speco Technologies 4TL General System Setup, Front Panel Introduction, LED Definition

TL H.264 DVR User’s Manual

3.General System Setup

Before operating the DVR, some general configuration should be setup first. The following subsections will introduce function keys on the front panel and general configuration of the DVR.

The regular displayed OSD information and its displayed positions are shown as following figure. Title of the channel will be displayed on the top-left corner of the window, either in full screen mode or in multiple channel mode. The current operating mode, including Call mode, Dome Control mode, Playback mode, Freeze mode and Sequence mode, will be displayed on the bottom-left corner of the screen. The date/ time information will be display on the bottom-right corner of the screen. On the upper-right corner will show the authority level of login account. Under logout condition, the icon will show “N”.

Ch1 N

►*1 2010/05/09 PM04:31:22

3.1Front Panel Introduction

The front panel controls enable users to control the unit and preset the programmable functions.

3.1.1LED Definition

The LEDs on the front panel of the DVR are described as follow.

Power LED

The LED lights up when the correct power is connected to the unit.

Alarm LED

The LED lights up when an alarm is triggered.

Network LED

The LED lights up when the DVR is connected to a network and blinks when the data is being transferred.

REC LED

The LED blinks while the DVR is recording.

15