Speco Technologies 4TL specifications Dome Control, Export Event Video, Dome Connection

TL H.264 DVR User’s Manual

4.4.3Export Event Video

To export event video, follow these steps:

•Press SEARCH and play wanted event video. To play event video, refer to section Search Recorded Video.

•After entering the playback mode, press COPY. The “ezBurn” window will display as below figure. The information shown is “read only”.

	ezBurn confirmation
	Selected Device: Built-in-DVD+RW
	All data on the disc will be erased.
	Exported Required Size = 11 MB
	Export Event Info:
Data	Time	Ch	Type
2010/04/07	AM10:42:35	13	Motion
	Enter: YES	ESC: NO

•If there is no any exportable device connected to the DVR unit, a warning message will be shown on the screen

•Press ENTER to start the export the whole event video to the connected device; or, press ESC to abort.

4.5Dome Control

The DVR allows users to control a dome camera by the front panel. In Live mode, users can press CHANNEL key to display the desired dome camera in full screen. To enter Dome Control mode, press the DOME key and press channel key 2 to display the hint screen. To exit the Dome Control mode and return to live mode, press ESC or DOME.

In dome control mode, press CALL + ENTER to open the OSD setup menu of the dome camera. To traverse the menu, press CALL + UP/DOWN keys to move up/down, CALL + RIGHT/LEFT to change value or to move left/right, and CALL + ENTER to select or enter submenu.

4.5.1Dome Connection

Follow the steps to install dome cameras.

•See Setup Guide for RS-485 port pin definition.

•Connect the R+, R- terminals on the dome camera to the D+, D- terminals on the RS-485 port by RS-485 cable respectively. Refer to the connection figure illustrated in Setup Guide.

36