Using your cooktop.
Safety
Be sure you turn the control knob to OFF when you finish cooking.
How to Light a Burner
Your cooktop burners are lit by electric ignition, eliminating the need for standing pilot lights with constantly burning flames.
The igniters make clicking sounds and spark even when only a single burner is being turned on. Do not touch any of the burners when the igniters are clicking.
Push the control knob in and turn it counterclockwise to the desired position from HIGH to LO. After the burner ignites, turn the knob in either direction to adjust the flame size. To turn a burner off, turn the knob clockwise as far as it will go, to the OFF position.
■In case of a power failure, you can light the burners with a match. Hold a lit match to the burner, then push in and turn the control knob to the HIGH position. Use extreme caution when lighting burners this way. Burners in use when an electrical power failure occurs will continue to operate normally.
■Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.
■Check to be sure the burner you turn on is the one you want to use.■Be sure the burners and grates are cool before you place your hand, a pot holder, cleaning cloths or other materials on them.
Instructions Operating Instructions Care and
Simmer and Power Burners
The right rear burner is best for smaller | The front right burner is the high power |
pans and cooking operations requiring | burner for larger pans and fast boiling |
carefully controlled simmering | operations. |
conditions. |
|
Cleaning
How to Select Flame Size
For safe handling of cookware, never let the flames extend up the sides of the cookware.
Watch the flame, not the knob, as you reduce heat. The flame size on a gas burner should match the cookware you are using.
Any flame larger than the bottom of the cookware is wasted and only serves to heat the handle.
Troubleshooting Tips Customer Service
9
