Speco Technologies 4TL specifications Remote Monitoring Software, System Requirements

TL H.264 DVR User’s Manual

6.Remote Monitoring Software

The remote monitoring software SpecoRemote is a remote browser-based software application designed to operate with the DVR products. Using the software, users are allowed to view live and recorded video, and configure the DVRs remotely via a LAN, WAN or Internet on a personal computer.

The connected PC will automatically download SpecoRemote plug-ins from the DVR when the DVR is connected by entering its IP address in the address bar on the browser.

Due to the setting items are similar to those listed in the DVR’s OSD setup menu, please refer to the chapter Advanced System Configuration for setting configuration of SpecoRemote.

The tasks can be performed with SpecoRemote are listed below:

•Remote viewing of live/ recorded video

•Remote setup of the DVR

•Remote control of dome cameras

•Alarm notification from the DVR

•Up to three connections to one DVR using SpecoRemote, including the preset “admin” and two other accounts

6.1System Requirements

Items	Minimum Requirements
	Minimum:
	Intel® Pentium® M CPU 1.40GHz
Personal Computer	RAM 512 MB
	Recommended:
	Intel® Core™2 Quad CPU Q6600 @ 2.4GHZ
	RAM 2 GB
Hard Disk Drive	Requires 20 MB for software installation
Operating System	Windows XP, Windows Vista
Web Browser	Microsoft Internet Explorer version 6.0 or above
Monitor Resolution	Minimum 1024 x 768 with 16-bit color
Network Card	10Base-T (10 Mbps) or 100Base-TX (100 Mbps)
	operation; must match the network configuration

87