The appliance components
qMounting plate/Baseplate
wPower cable
eWire aerial
rDisplay
t POWER | - On/Off switch for radio function |
y TIMER | - controls the timer programming |
u VOL. — | Volume reduction |
ALARM SET q | - controls the alarm function 1 |
i VOL. + | Volume increase |
ALARM SET w | - controls the alarm function 2 |
oBattery compartment
a MEM. | - for saving radio stations |
s MEM. | - for saving radio stations |
d A.O.T. | - controls the |
f | - Save button/Button lock |
g T DOWN T | - Selection button downwards |
h S UP S | - Selection button upwards |
jMODE
Fixing the kitchen radio beneath a wall cabinet
With the supplied mounting plate q you can fix the kitchen radio below, for example, a kitchen wall cabinet:
1.Determine a suitable location for the kitchen radio.
2.Press the two retaining levers on the back of the appliance down. Push the mounting plate q back and remove it.
3.Place the mounting plate q against the installation location. Allow 3 cm space to the front edges.
This way the kitchen radio will later fit flush.
4.Mark the four points for the drillholes with a pencil.
5.Mark the drillhole with a mandril. Firmly secure the mounting plate q with the supplied screws.
6.Hold the kitchen radio slanted, with the two recesses in the retaining lugs on the mounting plate q.
Press the kitchen radio upwards until it audibly engages.
- 6 -
