GB
IE
Handling and operation
Remote control
Inserting the battery
NOTICE
►The supplied battery (Type CR2025) is already installed in the remote control when delivered. Before use remove the isolation strip from the battery compartment.
For replacement with a new battery procede as follows:
Pull the battery compartment out of the remote
control by pressing the lateral locking device and at the same time pull the battery compartment out.
Remove the depleted battery and insert a new battery of the type CR2025 (Button cell) into the battery compartment. Be sure to insert the battery with the correct polarity.
Slide the battery compartment back into the remote control until it locks into place.
Using the remote control
Point the remote control to the Infrared sensor 4 on the front panel of the device.
NOTICE
►You can use the remote control up to a distance of 8 m from the device.
Handling and operation
In this chapter you receive important information for the handling and operation of the device.
NOTICE
►Most of the functions can be operated by the buttons on the device as well as by the buttons on the remote control. In these instructions operation via the buttons on the device is described. Any reference to the push buttons on the remote control will be specifically highlighted.
►If no setting is made and/or no button pushed within approx. 5 seconds the device returns to its previous operating mode. Changed settings are saved.
16 | KH 2377 |
