Handling and operation
TAVOL - Volume for traffic radio
Turn the multi controller to set the volume level, with which traffic reports are to be played back.
EON - Information from other stations
When the EON function is switched on the radio switches to traffic radio or PTY groups if the TA or PTY function has been activated.
Turn the multi controller in order to switch the EON function on (EON ON) or off (EON OFF).
DSP - Equalizer (Digital Sound Processing)
Turn the multi controller to select one of the settings DSP CLASSIC, DSP ROCK, DSP POP, DSP FLAT or DSP NONE. In the setting DSP NONE no DSP is switched on. The DSP equalizer setting is shown at the bottom of the display.
You can also set the equalizer by pressing the DSP button on the remote control. With this setting DSP is switched off when the radio frequency is shown again.
TA - Traffic Announcement (traffic radio)
Turn the multi controller to perform the following settings:
TA SEEK: As soon as the reception signal for traffic announcements becomes weaker or you leave the reception area the search function starts and will look for the strongest TA station.
TA ALARM: As soon as the reception signal for traffic announcements becomes weaker or you leave the reception area an alarm tone sounds.
PI - Program Identification (Sound with the station search)
Turn the multi controller to perform the following settings: PI SOUND: Station search with sound.
PI MUTE: Station search without sound.
RETUNE (Search times of stations with PI recognition)
Turn the multi controller to perform the following settings:
RETUNE L: The search process for a station with the correct PI recognition runs for 90 seconds.
RETUNE S: The search process for a station with the correct PI recognition runs for 30 seconds.
MASK (Conceal specific stations)
Turn the multi controller to perform the following settings:
MASK DPI: Conceals the AF stations which have another PI recognition.
MASK ALL: Conceals the AF stations which have another PI recognition and all annoying
GB
IE
KH 2377 | 19 |
