AccuCut A515pro 3in1 / A525pro 3in1 / A535pro 3in1
Specifications
Models | A515pro 3in1 | A525pro 3in1 | A535pro 3in1 |
|
| ||||
|
|
|
|
|
Product code | AC001230 | AC001235 | AC001240 |
|
|
|
|
|
|
Sheet Capacity 80g/m2* | 30 | 30 | 30 |
|
Cutting Length | 380mm | 457mm | 609mm |
|
|
|
|
|
|
Integrated Paper Guide | A4, A5, A6 & A7 | A3, A4, A5, A6 & A7 | A3, A4, A5, A6 & A7 |
|
|
|
|
|
|
Size Guide | Centimetres and Inches | Centimetres and Inches | Centimetres and Inches |
|
|
|
|
|
|
Score |
| |||
|
|
|
|
|
Perforate |
| |||
|
|
|
|
|
* refer to paragraph 4 in the operating the trimmer, section D.
Trimmer base with calibrated grid Metric and Imperial scale guide Magnetic Back Stop
Rotary blade / handle assembly Cutting Edge Guide
Safety cutting mat
Manual clamp
Paper Guide
NOTE: Please retain this information regarding safe operation of this paper trimmer
CAUTION: Trimmer should be operated by an adult or under adult supervision
CAUTION: Sharp blade, do not touch the edge of the blade
Operating the Trimmer
1Place the trimmer on a stable, flat surface such as a table.
2A. Slide the rotary blade housing to the top of the stationary rail. A1. To change cutting style push and hold the blade selector knob while turning to select the function desired.
3B. Raise the clamping handle and place the sheets (30 sheets Max.) to be trimmed at the desired position.
Cutting Restrictions
•Remove staples, paper clips etc. before cutting.
•Do not cut metal film, film containing glass etc.
•Do not cut more sheets than cutting capacity allows.
•Do not carry trimmer by holding on to the cutting blade handle.
4C. Hold sheets securely in place and lower the clamping handle. D. Push down on the rotary blade housing and slide to cut. Several cutting passes may be necessary to completely cut through all sheets depending on the load inserted.
TIP: In addition to using the grid pattern and scale for alignment, use the transparent cutting edge guide to quickly and accurately align your cuts.
•Always operate trimmer with both hands and on a stable base or desk.
•Check the fittings of the rotary blade and safety cutting rail from time to time.
4
