![](/images/new-backgrounds/1036573/365735x1.webp)
Introduction
The Sima speaker selectors have been designed to let you add additional speakers around your home or office and turn them on and off without purchasing additional amplifiers.
The Sima speaker selectors have the following features:
•Ability to add up to 4
•Left and right “commons” are isolated to work with all types of amplifiers
•Protection for amplifier and unit
•Small size to fit with any system
•No power required for operation
•Easy installation
•Can handle up to 100 watts amplifier power with unique protection circuitry
Front Panel
Figure 1, Front Panel (SSW-6 shown)
Controls
1 Speakers 1 through 4/6 - Press button in to select desired speaker. Orange indicator will show which speakers are active.
2 Indicators - Indicates selected speakers when orange.
3 Labels - To customize your selector to make speaker selection fool- proof.
4 Protection Switch: Press in, with the white indicator showing, to activate impedance protection to protect your amplifier from low speaker impedance.
Rear Panel
Figure 2, Rear Panel (SSW-6 shown)
5 - Connection from amplifier - | 6 - Speaker Connections - Connect |
from the speaker output of your | your speakers to these terminals. |
receiver or amplifier (100 watts |
|
max). |
|
Page 3