Simaudio owner manual Specifications, MOON MC-8 Multi-ChannelPower Amplifier, 29dB

MOON MC-8 Multi-Channel Power Amplifier

Specifications

Configuration		From 2 to 7 channels
Power Supply Transformers		3.0kVA
Power Supply Capacitance	(base)	216,000µF
Power Supply Capacitance	(additional per channel) ..	9,000µF
Class Of Operation		A/AB
Input Impedance		24,900Ω
Input Sensitivity		1420mV
Output Device Type		Bipolars - 8 per channel
Power Output at 8Ω / 4Ω (any channel)		250 Watts /		500 Watts
Frequency Response		10Hz - 100kHz +0/-3dB
Output Impedance		0.01Ω
Damping Factor (static)		800
Gain		29dB
Signal-to-noise Ratio		> 105dB @ full power
Slew Rate		80V/µs
Maximum Current – Peak / Continuous		40 amperes		/ 20 amperes
Crosstalk @ 1kHz		-90dB
Intermodulation Distortion	......................................	Unmeasureable
THD (20Hz - 20kHz) @ 1 watt / 250 watts		< 0.02 % /		< 0.05 %
Power Consumption @ idle	.....................................	85 Watts
AC Power Requirements		230V / 60Hz		or	240V / 50Hz
Dimensions (W x H x D, inches)		17.4 x	13.4	x	21
Balanced Input Pin Assignment:
	Pin 1	Ground
	Pin 2	Positive
	Pin 3	Negative
12 Volt Trigger:	Logic	Direct	(0V off, 12V on)
	Connector	1/8” mini-jack
	Input Impedance	1kΩ
	Current Consumption	12mA
Net weight:	Basic Unit	170 lbs. / 76 kgs.
	Each additional channel ...	4 lbs. / 2 kgs.
	Shipping Weight	240 lbs. / 108 kgs.

NOTE: In the event that you require either the RS-232 codes for your MOON MC-8or would like to operate this amplifier in a bridged mono configuration, please contact Simaudio Ltd. directly by either email (service@simaudio.com) or toll-free telephone (877-980-2400).

Fuse Replacement: Use a 10A Long Fast blow (3AG size).

____________________________________________________________________________________

Specifications 11