Simaudio owner manual Installation & Placement, MOON MC-8 Multi-ChannelPower Amplifier

Models: MC-8

1 11
Download 11 pages 27.55 Kb
Page 7
Image 7
Installation & Placement

MOON MC-8 Multi-Channel Power Amplifier

Installation & Placement

The MOON MC-8Multi-Channel Amplifier is powerful and very heavy. It requires reasonable ventilation to maintain an optimum and consistent operating temperature, especially since it will radiate heat when driven hard. Consequently, it should be placed in a location with empty space around it for proper heat dissipation. You should never place another component on top of this amplifier. As well, the amplifier should be placed on a solid level surface. You should avoid placing it near a heat source or inside a closed cabinet that is not well ventilated as this could compromise the amplifier’s performance and reliability. The MC-8uses a very large toroidal transformer in its power supply; even though it is well shielded, you should not place this amplifier too close to source components sensitive to EMI, such as turntables and phono preamplifiers.

When the amplifier reaches its normal operating temperature you may notice that, not only do the heat sinks become warm, the entire chassis idles at the same temperature. This is normal and intentional in the design of this amplifier: All the parts of the chassis are thermally inter-connected so that each channel reaches approximately the same temperature, even if some channels are driven harder than others. It also allows for previously unattainable sonic matching between channels by eliminating temperature discrepancies as a variable, which normally affects performance. Also, by reducing the average temperature it ensures a longer life for the internal components.

The MC-8is capable of delivering very high power output and its electrical consumption grows accordingly with its power output. The amplifier comes with a 20 ampere NEMA 6-20 power cord and corresponding 20A IEC connector on the back panel. The MC-8 requires a 240V/20A AC connection that uses a NEMA 6-20 outlet.

In the event that you require an electrican to arrange for a dedicated 20A circuit for this amplifier, you must ensure that the outlet type is a NEMA 6-20and NOT a NEMA 5-20. With a dedicated 20A AC outlet, you will be able to take full advantage of the power potential of the MOON MC-8Multi-Channel power amplifier.

____________________________________________________________________________________

Installation & Placement

7

Page 7
Image 7
Simaudio owner manual Installation & Placement, MOON MC-8 Multi-ChannelPower Amplifier