MOON P-7 Dual-Mono Preamplifier

Front Panel Controls

Figure 1: Front panel of MOON P-7 dual-mono Preamplifier

The front panel will look similar to Figure 1 (above). The large display window normally indicates the current volume level and, whenever you change the input, it will briefly show the selected input label. On each side of the display window, are two

(2)buttons. On the right side is a large rotary volume control. As well, there are four buttons (4) directly below the window, for a total of eight (8) which are all described in detail below:

The “Standby” button disengages the input section from the rest of the P-7’s circuitry and turns off the digital display. However, when in “Standby” mode all audio circuitry remains powered up to help maintain optimal performance. When switching back from “Standby”, both the ‘input’ and volume settings are re-established from the previous listening session. The blue pilot LED will not be illuminated when the P-7is in “Standby” mode.

The “Display” button allows you to adjust the brightness of the large digital display window. It also provides you with the option of turning off the display. There are three (3) different levels of brightness; The default is medium. Pressing the “Display” button once will increase the level to medium. Pressing the button a second time will further increase the brightness to the highest setting. Pressing the “Display” button a third time returns the display to its default setting of medium.

If you want to turn the display off, press and hold the “Display” button for 2 seconds. When the display is turned off, it will still come back on for a short period of time whenever you press any of the buttons located on the front panel or the remote control, using the brightness level that was previously set; the display will automatically turn off again once you are done. To turn the display back on, simply press and hold the “Display” button for 2 seconds.

The “Monitor” button provides for a dedicated loop to be used with either a component that can record & playback (Cassette Deck, DAT, CD-Recorder, etc.) or a signal processor such as an equalizer. Pressing this button allows you to 1) monitor the recording as it occurs on the recording device or 2) engage the effects of the signal processor. The monitor component’s outputs must be connected to the P-7’s “Tape Monitor In” and its inputs must be connected to the P-7’s “Tape Monitor Out”. The monitor output level is fixed and independent of the P-7’s volume setting. The LED immediately to the right of this button will illuminate when the “Monitor” function is engaged.

The “Mute” button reduces your volume setting to zero. Pressing the “Mute” button a second time will return the output volume to its previous level. As well, adjusting the volume level while the “Mute” function is engaged will effectively defeat the muting function.

____________________________________________________________________________________

Front Panel Controls

7

Page 7
Image 7
Simaudio P-7 owner manual Front Panel Controls

P-7 specifications

The Simaudio P-7 is an impressive piece of audio equipment that stands out in the realm of high-end preamplifiers. It is celebrated for its meticulous engineering, exceptional sound quality, and extensive capabilities. Designed and manufactured in Canada, the P-7 incorporates Simaudio's commitment to innovation and aesthetic appeal, providing audiophiles with an unparalleled listening experience.

One of the prominent features of the P-7 is its meticulous build quality. It features a robust chassis that not only enhances durability but also minimizes resonance, which could otherwise interfere with sound clarity. Simaudio implemented a dual-mono design in the P-7, ensuring that left and right channels operate independently to produce a perfectly balanced signal. This architectural choice contributes significantly to the unit's outstanding imaging and soundstage.

The P-7 includes a sophisticated circuit design that employs high-quality components throughout. For instance, it utilizes custom-made capacitors and precision resistors to ensure optimal signal integrity. The preamplifier's discrete transistor amplifiers are designed to deliver an incredibly low noise floor, which translates to a purer sound free from unwanted interference.

Another defining characteristic of the P-7 is its versatile connectivity options. It is equipped with multiple inputs, supporting both balanced XLR and unbalanced RCA connections. The ability to switch between formats ensures compatibility with a wide array of audio sources, including digital and analog components. Furthermore, the P-7 includes a comprehensive set of outputs, allowing connections to various power amplifiers and recording devices.

The P-7 also features an intelligent control interface, which includes a user-friendly remote. This allows for effortless adjustments to volume levels, input selection, and other features from a distance, enhancing the overall listening experience. Additionally, it is designed to integrate seamlessly with other components within Simaudio's Moon series, maintaining an aesthetic congruence while optimizing performance.

In terms of performance, the Simaudio P-7 is praised for its transparent sound reproduction and tonal accuracy across a broad frequency spectrum. It is particularly renowned for retaining the nuances and dynamics in recordings, producing an immersive audio experience that captivates listeners. The unit's exceptional resolution and detail retrieval make it a favorite among audiophiles looking for fidelity that does not compromise on emotional engagement.

Overall, the Simaudio P-7 preamplifier combines innovative technology with exquisite craftsmanship, delivering a compelling solution for those seeking high-performance audio. Its robust feature set, outstanding sound quality, and user-friendly design make it a prominent choice for anyone serious about their audio experience.