Features & Controls
RIDER FEATURES & CONTROLS
Figure 2. Rider Features
REF | NAME | FUNCTION | ||
A | Mower Lift Lever | Raises mower into transport position. | ||
|
|
|
|
|
B | Fuel Tank | 2 gal. (7.6L) | ||
|
|
|
|
|
C | Ignition Switch | Starts and stops the engine. | ||
|
|
|
|
|
D | Allows mower hitch (E) to raise and lower around very tight corners while mower | |||
|
| remains level. | ||
|
|
|
|
|
E | Mower Hitch | |||
|
| attachments | ||
|
|
|
|
|
F | Mower Deflector | Deflector is a necessary safety device to control objects thrown from the deck. Never | ||
|
| mow without deflector in place. | ||
|
|
|
|
|
G | PTO (Electric Clutch) Switch | Controls electric clutch for attachments. Pull out to engage PTO; push in to disengage | ||
|
| PTO. | ||
|
|
|
| |
H | Ground Speed Control Lever | Controls ground speed and forward/reverse motion. Push forward to go forward; pull | ||
|
| back to go in reverse. On hydro models, ground speed is controlled by how far lever is | ||
|
| in forward or reverse position. | ||
|
|
|
| |
I | Clutch/Brake Pedal | Press down to disengage clutch and apply brake. For parking brake, depress pedal | ||
|
| fully and pull up on parking brake control knob (J). | ||
|
|
|
| |
J | Parking Brake Control Knob | Engages parking brake. Depress clutch/brake pedal (I) fully and pull up knob to engage | ||
|
| parking brake. To disengage brake, depress pedal and push knob down. | ||
|
|
|
| |
K | Adjusts height of mower cut. | |||
L | Seat Adjustment Lever | |||
|
|
|
| |
M | Engine Throttle/Choke Lever | Push forward to increase engie RPM. Push all the way forward for choke position. | ||
|
|
|
| |
N | Seat Deck | Lightweight | ||
|
|
|
| |
O | Drawbar | For use with utility carts or | ||
|
| Catcher. | ||
|
|
|
| |
P | Engine Muffler | Exhausts hot air to the right side away from the fuel tank. Use caution around the heat | ||
|
| shields and muffler until hot surfaces cool after operation. | ||
|
|
| ||
Q | Mower Levelling Nut | Allows for the accurate | ||
|
|
|
|
|
6