Simplicity 1692624 Broadmoor/LT/1600/2600 Series Landlord/GT/1700/2700 Series Only, E. Hitch

Assembly

NOTE: On single cylinder tractors, clevis pin (B, Figure 6) must be installed to bracket before mount- ing bracket on tractor frame.

NOTE: Spring-assist bracket (A, Figure 6) does not need to be installed on units with electric lift.

Broadmoor/LT/1600/2600 Series &

Landlord/GT/1700/2700 Series Only:

7.See Figure 6. Install the spring-assist bracket (A) to tractor frame (bracket is mounted underneath frame). Secure with capscrew (from top), lock- washer, and nut. Place clevis pin (B) through bracket and install flat washer, chain (C), flat washer, and safety clip.

Figure 6. Spring Assist Bracket

A. Bracket

B. Clevis Pin

C. 4-Link Chain

Regent/500/2500 Series Only:

8.See Figure 7. Assemble the spring-assist bracket

(A) to the hitch assembly (E). Secure with cap- screw, lockwasher, and nut.

9.See Figure 7. Insert spring assist clevis pin through inside of spring-assist bracket (A), and secure spring assist chain using flat washers and safety clip in same manner as shown in Figure 6.

Regent/500/2500 Series & Broadmoor/LT/1600/2600 Series

NOTE: If your tractor is not equipped with the Large Lift Lever, install it at this time. Follow the instructions supplied with the kit.

-Broadmoor/LT/1600/2600 Series, order Lift Lever Kit, mfg. no. 1691832.

-Regent/500/2500 Series, order Lift Lever Kit, mfg. no. 1692623.

A

E

D

BC

Figure 7. Spring Assist Bracket

A.Spring Assist Bracket

B.Capscrew, 1/2-13 x 1-1/4

C.Lockwasher, 1/2

D.Hex Nut, 1/2-13

E.Hitch

8